Multitool Belt and Disc Grinding Attachment 1220 x 100mm 178mm Disc PO484

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
EFFICIENCY - Superior performance and a user friendly belt change of under 5 seconds.
VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.

SPECIFICATION

• 48" x 4" wide (1220 x 100mm) belt.
• 7" (178mm) diameter disc.
• 3 1/2" (89mm) diameter rubber contact wheel.
• 5 1/2" (140mm) diameter drive wheel.
• The 484 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP.
• Suits shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".
• Fitting Kit supplied.
• NOTE: This is an attachment only.

Part Number/SKU: PO484

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.